Epson 500 - Manual (Page 45)

Using Cinema Color Editor
45
Using Cinema Color Editor
To start Cinema Color Editor, follow these steps:
1. Make sure the projector is connected and turned on, as described on the previous pages.
2. Windows: Click Start , Programs , EPSON Projector , and then Cinema Color Editor .
Macintosh: From the Applications folder on your hard drive, open the CCEditor folder
and double-click Cinema Color Editor .
You see this screen:
3. Select the name of the projector you want to adjust, then
click Connect . You see this screen:
Now you can control the projector and adjust its settings as
described on the following pages.
Select your projector . . .
. . . and click Connect