Epson 500 - Manual (Page 55)

Changing the Remote Control’s Batteries
55
Changing the Remote Control’s Batteries
The remote control uses two AA batteries. If you suspect they are weak, take the remote
control to a darkened room and press the
illumination button. If the buttons on the
remote control do not glow red, replace the batteries as described below.
Warning: Keep batteries away from children. If a battery should be swallowed, contact your
doctor immediately.
1. Release the tab and lift open the cover.
2. Remove the old batteries and insert new AA batteries as shown.
3. Replace the cover.
Storing the Projector
If you need to store the projector for an extended time, do the following:
■ Make sure the temperature and humidity of the storage area are within the recommended
range for the projector (14 to 140 °F [-10 to 60 °C] and 10 to 90% relative humidity).
■ Attach the lens cover and retract the feet.
■ Remove the batteries from the remote control.
■ Pack the projector in its original packaging or equivalent.