RIGOL DS6000 Series - Manual (Page 197)

10 Waveform Recording RIGOL
DS6000 User’s Guide 10-5
5. End Frame
Press this softkey and use to set the end frame of the playback. The default
is the number of frames of the waveform to be played back.
6. Playback Operation
Waveform playback can be realized through the shortcut buttons in the menu or
at the front panel.
Menu Front Panel
Press Operate and select “ ”
to start playing back. Press , the backlight goes on (in yellow),
which indicates that the playback is started.
Press Operate and select “ ”
to pause the playback. Press again to pause the playback.
Press Operate and select “■”
to stop the playback. Press to stop the playback.
Tip
In waveform playback, use Run/Stop to switch between play and pause. Each
time Single is pressed, the Current Frame moves one frame forward.