RIGOL DSA1030 - Manual (Page 17)

RIGOL
Quick Guide for DSA1000 Series 3
Function keys description (Continued)
Keys Description
Searches signals automatically within full frequency range.
Sets the trigger mode and corresponding parameters.
Sets the sweep mode to Single.
Sets the sweep mode to Continue.
Function setup
Sets the detection mode of the analyzer.
Sets the parameters relate to sweep trace.
Sets the demodulation.
Sets the tracking generator*.
Advanced measure**
Select a desired advanced measurement function.
Sets the parameters for the selected measurement function.
Marker measure
Reads the amplitude, frequency and sweep time of a certain
point on the trace.
Sets other system parameters based on the current marker
value.