RIGOL DSA1030 User Manual
Page 39
RIGOL
Quick Guide for DSA1000 Series
25
User interface legends (Continued)
NO. Name
Explanation
29
RBW
Resolution bandwidth of frequency.
30
Center or
starting
frequency
The frequency range of current sweep channel
can be expressed by a combination of center
frequency and span or a combination of starting
frequency and stop frequency.
31
Y scale
Label of Y scale.
32
Parameter
status
Icons on the left side of the screen indicate the
status of system parameters.
33
Detection type
Pos peak, Neg peak, Sample, Normal, RMS Avg
Voltage Avg and Quasi-Peak.
34
Trigger type
Free, video and external.
35
Sweep mode
Continuous or Single sweep (with current
sweeping times showing)
36
Correction
switch
Turn the Correction On or Off.
37
Signal tracking
Enable or disable signal tracking.
38
Preamplifier
status*
Enable or disable the preamplifier.
39
Trace 1 types
and status
Trace types: Clear Write, Max Hold, Min Hold,
Video Avg and Power Avg.
Trace status: yellow denotes On, and gray
denotes Off.
40
Trace 2 types
and status
Trace types: Clear Write, Max Hold, Min Hold,
Video Avg and Power Avg.
Trace status: purple denotes On, and gray
denotes Off.
Note*: This function is the option of DSA1030/DSA1030-TG.