RIGOL DSA1030 - Manual (Page 22)

RIGOL
8 Quick Guide for DSA1000 Series
Figure 5 Tracking generator output connection
CAUTION
Reverse power or voltage mustn’t be higher than 1 W or 50 V DC to
avoid damages to the tracking generator.
3. PROBE POWER
This connector provides two lines of power supply to a RF probe: 15 V, 150
mA, and -12.6 V, 150 mA.
4. RF INPUT 50Ω
The RF input may be connected to a device under measure via an N male
connector, see figure below.
Figure 6 RF input connection