Disassemble the front panel cover, Adjust the supporting legs, Connect the power – RIGOL DSA1030 User Manual
Page 30
Advertising
RIGOL
16
Quick Guide for DSA1000 Series
Disassemble the Front Panel Cover
Before putting your analyzer into action, remove the front panel cover by
releasing latches at both sides, and sliding in the direction of the arrows as
shown in the figure below.
Figure 14 Disassemble the front panel cover
Adjust the Supporting Legs
If necessary, adjust the supporting legs of the analyzer to an appropriately
position in the direction of the arrows as shown in the figure below.
Figure 15 Adjust the supporting legs
Connect the Power
The spectrum analyzer can use AC power or rechargeable battery (China only)
for power supply.
Advertising