Encore electronic ENHWI-G2 - Manual (Page 23)

x Active Wireless Client Table
This is the window that pops up after clicking the “Show Active Clients”
button.
MAC Address MAC address of this active wireless station.
Tx Packet
The number of transmitted packets that are sent out
from this active wireless station.
Rx Packet The number of received packets that are received by
this active wireless station.
TX Rate The transmission rate
Power Saving Shows if the wireless client is in Power Saving mode
Expired Time
This is the time in second before dissociation. If the
wireless keeps idle longer than the expired time, this
wireless router will dissociate it. The wireless client
station has to associate again when it is active.
Refresh Refresh the "Active Wireless Client Table".
Close Close the "Active Wireless Client Table".
18