Encore electronic ENHWI-G2 - Manual (Page 28)

Access Control
To restrict the Number of Access authentication of Stations, Set up the
control list in this page.
Configuration
Wireless Access
Control Mode
Click on the drop list to choose the access
control mode. You may select “Allow listed” to
allow those allowed MAC addresses or select
“Deny Listed” to ban those MAC addresses from
accessing to this device.
MAC Address &
Comment
To set up the Value of MAC Address &
Comment; enter the MAC Address and
Comment of station and click Apply Changes to
save.
Current Access
Control list
To Delete the station on the list, Click the check
box in the select item and click the “Delete
Selected”. If you want to delete all stations on
the list, click “Delete All” to remove all of them.
23
Click <Apply Change> button to save the above configurations. You can
now configure other advance sections or start using the router.