Encore electronic ENHWI-G2 - Manual (Page 45)

Time Zone Setting
This page allows users to configure the time of the router. To specify
manually, fill in the blanks in “Current Time” and click the “Apply Change”
button. To synchronize time from a timeserver, please mark the “Enable NTP
client update” checkbox, select a NTP server from the drop list or manually
enter a NTP server. Click the “Apply Change” button after your configuration.
System Log
This System Log page shows the information of the current activities on
the router.
To enable system log function:
1. Mark the “Enable Log” checkbox.
2. To see all information of the system, select the “system all” checkbox.
To see wireless information only, select the “wireless” checkbox.
To sent the log information to a certain note, select the “Enable
Remote Log” checkbox and fill in the IP address in the “Log Server IP
Address” box.
3. Click the “Apply Changes” button to activate
40
You could also click the “Refresh” button to refresh the log information or click
the “clear” button to clean the log table.