TA Triumph-Adler DC 2325 - Manual (Page 145)

Basic Operation
OPERATION GUIDE 3-59
3
4 Repeat steps 2 and 3 to cancel other jobs.
Canceling Jobs with the Stop Key
You can also cancel jobs by pressing the Stop key.
Cancelling jobs by pressing the Stop key differs in detailed procedures
depending on the content of Reserve Next Priority Settings.
If Reserve Next Priority Setting is set to On
Printing jobs
The Copy function default screen appears on the touch panel during
printing.
1 Press the Stop key.
Cancelling job
screen appears.
The current print job
is temporarily
interrupted.
2 To cancel printing, select [Cancel], and then press [Yes] in the confirmation
screen.
To restart a job, press [Resume All Print Jobs].
NOTE: If the machine is left for 60 seconds, Cancelling job screen is
automatically closed, and paused printing job resumes.
Pressing the Stop key during scanning originals cancels the scanning
operation.
Sending jobs
You cannot temporarily stop a sending job, that is already being executed,
even by pressing the Stop key.
1 Press the Stop key.
A status screen is displayed.
2 To cancel printing, select [Cancel], and then press [Yes] in the confirmation
screen.
To restart a job, press [Close].
Status 10/10/2007 10:10
Original
Zoom
Paper
100%
- - -
:
:
: - - -
Image
Quality
Ready to copy.
Set Original.
Copies
Copy Image
Org./Paper /
Finishing
Quick Setup Layout /Edit Advanced
Setup
1
Normal 0 Letter
Zoom Density Paper
Selection
1-sided
>>1-sided Text+Photo Collate
Duplex Original
Image Collate/
Offset
Auto
Plain
Preview
Interrupt