TA Triumph-Adler DC 2325 - Manual (Page 49)

Preparation before Use
OPERATION GUIDE 2-15
2
Sending E-mail
Specifying the SMTP settings allows you to send images loaded onto this
machine as E-mail attachments.
To use this function, this machine must be connected to a mail server using
the SMTP protocol.
Before sending images loaded onto this machine as E-mail attachments,
check the following:
• The network environment used to connect this machine to the mail
server
A full-time connection via a LAN is recommended.
• SMTP Settings
Use COMMAND CENTER to register the IP address and host name
of the SMTP server.
• If limits have been set on the size of E-mail messages, it may not be
possible to send very large E-mails.
The procedure for specifying the SMTP settings is explained below.
1 Click Advanced -> SMTP -> General.