TA Triumph-Adler DC 2325 - Manual (Page 96)

Basic Operation
3-10 OPERATION GUIDE
Original Preview
You can display a preview image of the scanned document on the panel.
NOTE: To view a preview of an image stored in a Custom Box, refer to
the Advanced Operation Guide.
The procedure for previewing scanned originals is explained below.
The procedure described here is for copying a single-page original.
1 Place the original on the platen and press the Copy key.
2 Press [Preview].
3 The machine starts scanning the original. When scanning is completed,
the preview image appears on the panel.
4 To change the
quality or the layout,
press [Change
Setting]. Change the
settings and press
[Preview] again to
see a preview image
with the new
settings.
NOTE: If you scan a multi-page original, only the first page is previewed.
If you are compiling multiple pages, first press [Preview], scan all the
originals, and then press [Scan finish], and a preview of the first page is
displayed.
To change the mode when a preview image is displayed, press Reset key
and then change the mode.
For booklet copying, the finished page including the lead page of the
original is displayed.
Preview is not available if a high compression PDF is selected.
Status 10/10/2007 10:10
Original
Zoom
Paper
100%
- - -
:
:
: - - -
Image
Quality
Ready to copy.
Set Original.
Copies
Copy Image
Org./Paper /
Finishing
Quick Setup Layout /Edit Advanced
Setup
1
Normal 0 Letter
Zoom Density Paper
Selection
1-sided
>>1-sided Text+Photo Collate
Duplex Original
Image Collate/
Offset
Auto
Plain
Preview
Interrupt
Status 10/10/2007 10:10
Advanced
Setup
Ready to copy.
Original
Zoom
Paper
Copy Image
Zoom Density Original
Size
Duplex Original
Image Collate/
Offset
1-sided
>>1-sided
Text+Photo Collate
100% Normal 0 Auto
Layout /Edit Image
Quality
Org./Paper /
Finishing
Quick Setup
Copies
1
100%
Letter
:
:
: Letter
Change Setting
Interrupt