Amprobe SOLAR-500 Solar-Analyzer - Manual (Page 31)

25
SOFTWARE INSTALLATION
Install Application Program
Execute Install.bat (which is in installation disc) to enter the procedures
of installing Application Program. Please follow the instructions to install
Application Program. When performing the installation of Application
Program, the USB driver program and NI-VISA Runtime Engine will be installed
automatically.
Remark:
1. If users have ever installed our Programs (NI-VISA) of other versions in his
PC, first please (go to Control Panel to) remove them.
2. After putting the installation disc into CD-ROM drive, the application
program will automatically execute the installation.
3. If the installation is not automatically executed, please choose the Install.
bat program in the installation disc to perform the installation.
4. After Application Program has been installed, please Restart the system.
Install USB Driver
When performing the installation of Application Program, the USB driver
program will be installed automatically.
However, if users need to manually install the USB driver program, please
choose USBDriver Directory in the installation disc, click CP210xVCPInstaller.
exe program (for Windows Vista / XP / 2000) to execute the installation of USB
Driver.
Remark:
1. If the driver can’t detect the hardware, please remove the hardware and
then plug it in properly.