Amprobe SOLAR-500 Solar-Analyzer - Manual (Page 37)

31
Auto Scan Solar Analyzer
Auto Scan the Solar panel to obtain measurement results
Remark:
1. Press “Auto Scan” to auto scan the solar pane.
2. The red block in the center shows the Auto Scan status.
3. Press “Present Sample” to change the present sample (location) to last
or next logged data. The information of the present sample will be
showed on the LCD: Logged Date & Time, Vopen, Ishort, Pmax, Vmaxp,
Imaxp, P, V, I (Power, Voltage and Current of the cursor position).
4. Save: to save the present scanned data into PC. (file name: *.200 Record)
5. Open: to read the scanned data saved in PC.
9 8 7 6 5 4 1
2
3