Energy key – Amprobe ACD-51HP Power-Quality-Clamp-Ons User Manual
Page 14
Advertising
ACD-51HP - ACD-56HPQ
4.2.4. ENERGY key
With the rotary selector on “
W
" or "
W3
Φ
" position, press and hold this key at least 1
second to activate the energy measurement. With the rotary selector switch in the
following positions:
W
: push
the
ENERGY key to start the active energy, reactive energy, apparent
energy and power factor measurements on single-phase systems. Pushing
FUNC key every single parameter value is displayed.
•
W3
Φ:
push the ENERGY key to start the active energy, reactive energy, apparent
energy and power factor measurements on three phase-balanced systems.
Pushing
FUNC key every parameter value is displayed.
•
EN - 10
Advertising
This manual is related to the following products: