Instrument description, Legend, Func ) function key to select measuring mode. ) u – Amprobe Multitest-1000 Continuity-Tester User Manual
Page 7
2.2. INSTRUMENT
DESCRIPTION
1
2
3
DISP
RCL
ESC
SAVE
CLR
START
STOP
FUNC
U
n
/I
∆n
DIST
S
U
L
LEGEND:
1.
Display
2.
Function keys
3.
Rotary switch
FUNC
)
FUNCTION key to select measuring mode.
)
U
n
/ DIST key for selection of rated voltage or distance depending on
which measurement is selected.
U
n
DIST
)
key for increasing the test duration interval or to scroll the results of
the stored tests.
)
key for decreasing the test duration interval or to scroll the results of
the stored tests.
)
ON/OFF key. Keep it pressed a few seconds switch off the instrument.
Release when beep sounds.
DISP
START
STOP
)
START/STOP key for start or to stop tests.
)
DISPLAY key to display the stored results.
CLR
)
CLEAR key to cancel the stored results.
RCL
ESC
)
RECALL/ESCAPE key to recall the stored tests (RCL) and leave the
selected function or mode (ESC).