Amprobe PRM-6 - Manual (Page 13)

9
Operating altitude Up to 2000 m
Humidity (Without condensation) ≤ 80% RH
Storage conditions 0 O C to 40 O C (32 O F to 104 O F), ≤ 80% RH
Power supply 2 x 1.5 V AAA alkaline battery
Battery life Minimum 2 years for average use
Dust/water resistance IP 40
Pollution degree 2
Dimensions (H x W x D) 137 x 65 x 33 mm (5.43 x 2.56 x 1.3 in)
Weight 170 g (0.38 lb) (battery installed)
Product Standard EN 61557 -1/-7
Electrical safety EN 61010-1, EN 61557-7
Overvoltage category CAT IV 600 V
EMC Conforms to EN 61326-1
Agency approvals ) P
MAINTENANCE
W Caution
To prevent damage to the PRM-6:
• Do not attempt to repair or service the PRM-6 unless qualified to do so.
• Make sure that the relevant calibration, performance test, and service
information is being used.
• Do not use abrasives or solvents. Abrasives or solvents will damage the
PRM-6 case.
Cleaning
The only maintenance the PRM-6 requires is inspection and cleaning.
Periodically wipe the case with a mild solution of detergent and water. Apply
sparingly with a soft cloth and allow to dry completely before using. Do not
use aromatic hydrocarbons, gasoline or chlorinated solvents for cleaning.