Avago Technologies Cache Protection for RAID Controller Cards - Manual (Page 100)

Avago Technologies
- 100 -
Cache Backup Products for MegaRAID SAS+SATA RAID Controllers User Guide
May 2015 Chapter 2: Installing the Cache Backup Products
Attaching the CVFM03 Module to a MegaRAID SAS 9265CV-8i RAID Controller and
Connecting to a Remote CVPM02 Module
2.10.4 Attaching the CVPM02 Module to the Clip on the Remote Mount Board
Follow these steps to attach the CVPM02 module to the clip on the remote mount board.
1. Place the remote mount board on a flat, clean, static-free surface.
2. Ground yourself and make sure the system is grounded.
3. Remove the CVPM02 module from the package.
4. Press the CVPM02 module into the clip on the remote mount board until the module clicks firmly into place, as
shown in the following figure.
Figure 68 Attaching the CVPM02 Module to the Clip on the Remote Mount Board
A
CacheVault
Power Module
Clip
3_01275b-00