Avago Technologies Cache Protection for RAID Controller Cards - Manual (Page 108)

Avago Technologies
- 108 -
Cache Backup Products for MegaRAID SAS+SATA RAID Controllers User Guide
May 2015 Chapter 2: Installing the Cache Backup Products
Attaching the CVFM04 Module to the RAID Controller and by Cable to a CVPM02 Module on
a Remote Mount Board
2.11.2.4 Attaching the CVPM02 Module to the Clip
Follow these steps to attach the CVPM02 module to the clip.
1. Ground yourself, and make sure that the system is grounded.
2. Remove the CVPM02 module and the clip from the package.
3. Place the CVPM02 module and the clip front-side-up on a flat, clean, static-free surface.
4. Press the CVPM02 module into the clip until the module clicks firmly into place, as shown in the following figure.
Figure 75 Attaching the CVPM02 Module to the Clip
A
CacheVault
Power Module
Clip
3_01275b-00