Avago Technologies Cache Protection for RAID Controller Cards User Manual
Page 92
Avago Technologies
- 92 -
Cache Backup Products for MegaRAID SAS+SATA RAID Controllers User Guide
May 2015
Chapter 2: Installing the Cache Backup Products
Connecting a CVFM02 Module on a RAID Controller to a CVPM02 Module Mounted on a
Remote Mount Board
2.9.3
Attaching the CVPM02 Module to the Clip on the Remote Mount Board
Follow these steps to attach the CVPM02 module to the clip on the remote mount board.
1.
With the remote mount board on a flat, clean, static-free surface, ground yourself, and make sure that the system
is grounded.
2.
Remove the CVPM02 module from the package.
3.
Press the CVPM02 module into the clip on the remote mount board until the module clicks firmly into place, as
shown in the following figure.
Figure 61 Connecting the CVPM02 Module to the Clip on the Remote Mount Board
A
CacheVault
Power Module
Clip
3_01275b-00