Avago Technologies Syncro 9361-8i - Manual (Page 26)

Avago Technologies
- 26 -
Syncro CS 9361-8i and Syncro CS 9380-8e Solution User Guide 
October 2014
Chapter 2: Creating the Cluster
Creating the Cluster in Red Hat Enterprise Linux (RHEL) and CentOS
Figure 13 Create New Cluster Dialog
6. Click Create.
7. Enter a name in the Cluster Name field.
NOTE The Cluster Name field identifies the cluster and is referenced in
proceeding steps.
8. Add each server node in the Node Name field.
NOTE The same cluster name is used when you create gfs2 FS.
9. In the password field, enter the ricci password for each server node that participates in the cluster.
10. Select the Enable Share Storage Support check box.
11. Click Create Cluster.
This action completes the creation of the cluster.