Avago Technologies Syncro 9361-8i - Manual (Page 67)

Avago Technologies
- 67 -
Syncro CS 9361-8i and Syncro CS 9380-8e Solution User Guide 
October 2014
Chapter 3: System Administration
Updating the MegaRAID Driver
3.4.2 Updating the MegaRAID Driver in Windows Server 2012
As a best practice, always back up system data before updating the driver, and then perform a planned failover. These
steps are recommended because a driver update requires a system reboot.
1. Run Server Manager and select Local Server on the left panel.
2. Click the Tasks selection list on the right-hand side of the window, as shown in the following figure.
Figure 49 Updating the Driver Software