Avago Technologies Syncro 9361-8i - Manual (Page 34)

Avago Technologies
- 34 -
Syncro CS 9361-8i and Syncro CS 9380-8e Solution User Guide 
October 2014
Chapter 2: Creating the Cluster
Creating the Cluster in Red Hat Enterprise Linux (RHEL) and CentOS
5. Click the QDisk tab in the Quorum Disk Configuration dialog.
6. In the Heuristics section of the dialog, enter the following in the Path to Program field:
ping -c3 -w1 <YOUR_GATEWAY_IP_ADDRESS>
7. Enter 2 in the Interval field, 1 in the Score field, 10 or 20 in the TKO field, and 1 in the Minimum Total Score field.
NOTE You can modify the entries in these fields, depending on your cluster
environment.
8. Click Apply when complete.
This action creates the quorum disk.
Figure 21 Quorum Disk Configuration Dialog