Avago Technologies Syncro 9361-8i - Manual (Page 45)

Avago Technologies
- 45 -
Syncro CS 9361-8i and Syncro CS 9380-8e Solution User Guide 
October 2014
Chapter 2: Creating the Cluster
Creating the Cluster in SuSE Linux Enterprise Server (SLES)
4. Click Finish.
5. After the fields in the following screen display the information, click Generate Auth Key File on Node1 only.
This action creates an authentication key that is written to /etc/corosync/authkey.
To make node2 join the existing cluster, do not generate a new key file. Instead, copy the /etc/corosync/authkey
from node1 to the node2 manually.
Figure 32 Cluster Setup on Security Tab