PLANET WSG-500 - Manual (Page 127)

123
5) Using Specific IP Address: If you want to use a specific IP address, acquire the following
information from the network administrator: the IP Address, Subnet Mask and DNS Server
address provided by your ISP and the Gateway address of WSG-500.
Caution:
If your PC has been set up completely, please inform the network administrator before proceeding to
the following steps.
5.1) Choose “Use the following IP
address” and enter the IP address,
Subnet mask. If the DNS Server field is
empty, select “Using the following
DNS server addresses” and enter the
DNS Server address. Then, click OK.
5.2) Click Advanced to enter the Advanced
TCP/IP Settings window.
5.3) Click on the IP Settings tab and click
Add below the “Default gateways”
column and the TCP/IP Gateway
Address window will appear.