Vsa configuration in radius server (freeradius), Step 1, Step 2 – PLANET WSG-500 User Manual
Page 138: Step 3
Advertising
134
3. VSA configuration in RADIUS server (FreeRADIUS)
This section will guide you through VSA configuration with FreeRADIUS v1.0.5 running on “Fedora”.
Before getting started, open the shell of RADIUS server; for example, use Putty to access the Linux
host:
Step 1
Confirm the following key elements in RADIUS server: users, groups
♦
Verify whether there are already users in RADIUS Server.
♦
Verify whether there are already Groups and assigned users belonging to these Groups in
RADIUS Server.
Step 2
Log in the Linux host of the RADIUS server.
Step 3
Create a file “dictionary.WSG-500” under the “freeradius” folder.
Advertising