PLANET WSG-500 - Manual (Page 130)

126
5.1) Choose “Use the following IP
address” and enter the IP address,
Subnet mask. If the DNS Server field is
empty, select “Using the following
DNS server addresses” and enter the
DNS Server address. Then, click OK.
5.2) Click Advanced to enter the Advanced
TCP/IP Settings window.
5.3) Click on the IP Settings tab and click
Add below the “Default gateways”
column and the TCP/IP Gateway
Address window will appear.
5.4) Enter the gateway address of WSG-500 in
the “Gateway” field, and then click Add.
After back to the IP Settings tab, click
OK to finish the configuration.