2 dynamic domain name service (ddns), Dynamic domain name service (ddns) – PLANET WSG-500 User Manual
Page 79
User’s Manual
WSG-500 Wireless Hotspot Gateway ENGLISH
75
9.2 Dynamic Domain Name Service (DDNS)
Configure Dynamic Domain Name Service, go to: Network >> DDNS.
Before activating this function, you must have your Dynamic DNS hostname registered with a
Dynamic DNS provider. WSG-500 supports DNS function to alias the dynamic IP address for the WAN
port to a static domain name, allowing the administrator to easily access WSG-500’s WAN. If the
dynamic DHCP is activated at the WAN port, it will update the IP address of the DNS server periodically.
These settings will become effective immediately after clicking Apply.
y
DDNS: Enable or disable this function.
y
Provider: Select the DNS provider.
y
Host name: The IP address/domain name of the WAN port.
y
Username/E-mail: The register ID (username or e-mail) for the DNS provider.
y
Password/Key: The register password for the DNS provider.
Note:
To apply for free Dynamic DNS service, you may go to
.