ProSoft Technology MVI71-DFNT - Manual (Page 61)

MVI71-DFNT ♦ PLC 5 Diagnostics and Troubleshooting
EtherNet/IP Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 61 of 175
February 3, 2011
4.2.7 Network Menu
From the main menu press [@] to display the Network menu screen. The
Network menu allows you to send, receive, and view the WATTCP.CFG file that
contains the IP and module addresses, and other network information.
Press [R] to transfer a new WATTCP.CFG file from the PC to the module. Use
this command to change the network configuration for the module (for example,
the module’s IP address).
Transferring WATTCP.CFG to the Module
Press [Y] to confirm the file transfer, and then follow the instructions on the
terminal screen to complete the file transfer process.
Press [S] to transfer the WATTCP.CFG file from the module to your PC.
Transferring WATTCP.CFG to the PC
Press [Y] to confirm the file transfer, and then follow the instructions on the
terminal screen to complete the file transfer process.
After the file has been successfully transferred, you can open and edit the file to
change the module’s network configuration.