Canon EOS 80D - Manual (Page 286)

W-38
Sending Images to a Smartphone
To end the image transfer, press the
<M> button on the image transfer
screen.
 If you have established the
connection with the NFC function
while playing back an image, the
connection termination screen will
appear. Select [OK] to terminate the
connection.
 If you have sent images from the
menu or Quick Control, the previous
screen will reappear. The connection
will not be terminated.
Ending Image Transfer
 If necessary, also read “NFC Function Cautions” (p.W-17).
 During the image transfer operation, a picture cannot be taken even if
the camera’s shutter button is pressed.
 Images cannot be sent using the NFC function while the camera is
connected to another device wirelessly. In addition, the camera cannot
be connected to multiple smartphones at the same time.
 Even if MOV-format movies are displayed in the list, they cannot be
saved to a smartphone.
 You can cancel the image transfer by selecting [Cancel] during the
transfer.
 You can select up to 50 files at a time.
 While connected, disabling the smartphone’s power saving function is
recommended.
 Settings for image transfer using the NFC function are not saved on the
camera.
 When you reduce the image size, all images to be sent at the same time
are resized. Movies, as well as still photos that are smaller than b size,
are not reduced.
 When you use a battery to power the camera, make sure it is fully
charged.
 While connected, the camera’s auto power off does not function.