Care & maintenance, In-1 dust compartment with water tank and filter, Pausing – Xiaomi Robot Vacuum E10 User Manual
Page 11: Adding water or cleaning the mop pad, Docking & charging, Dnd mode
10
CAUTIONS:
Do not rinse or soak the 2-in-1 dust compartment with water tank.
Regularly clean the 2-in-1 dust compartment with water tank to prevent dirt buildup. This
will help maintain optimal performance.
2-in-1 Dust Compartment with Water Tank and Filter
Care & Maintenance
When the robot vacuum is running, press any button to pause. Press the
button to resume cleaning.
Note:
The robot vacuum will enter sleep mode after being paused or in standby mode for
five minutes. Press any button to wake it up.
Pausing
When the robot vacuum is working, pause it first then remove the 2-in-1 dust
compartment with water tank to add water or clean the mop pad. Then
reinstall the 2-in-1 dust compartment with water tank and press the button
to resume the task.
Adding Water or Cleaning the Mop Pad
When the robot vacuum is working, press the button to pause the task, and
press the button again to send the robot vacuum to return to the dock to
charge.
When the robot vacuum is in standby mode and not connected to the charging
dock, press the button to send the robot vacuum to return to the dock to
charge. When a task is complete or the battery is too low, the robot vacuum will
automatically return to the dock to charge.
Docking & Charging
Note:
When using the robot vacuum for the first time, it is recommended to follow the robot
vacuum and remove any obstacles on the ground. If the robot vacuum may get stuck or
scratch the surface of the furniture in some areas, you can set physical barriers to prevent
the robot vacuum from entering those areas.
In the do not disturb (DND) mode, the robot vacuum does not perform
scheduled cleanups, and the indicator turns off after one minute of charging.
The DND mode can be enabled or disabled in the app.
Note:
For more functions, please go to the app.
DND Mode
1. Take out the 2-in-1 dust compartment with water tank and open its cover.
Remove any debris and clean the 2-in-1 dust compartment with water tank
with the cleaning brush.
ş
Š
š
2. Remove the filter and clean it with the cleaning brush.
Note:
The filter can be rinsed with water. Make sure it is completely dry before
reinstalling. Frequent rinses are not recommended.
ş
Š