Xiaomi Mi Vacuum Cleaner G10 - Manual (Page 11)

18 19
1
2
2. Remove the HEPA filter from the vacuum cleaner by pulling it
down in the direction shown in the figure.
Care & Maintenance
Cleaning the HEPA Filter
1. Remove the dust compartment as shown in the figure.
Note: It is recommended to clean the HEPA filter once every 4
to 6 months.
3. Clean the HEPA filter with clean water. Make sure you rotate the
HEPA filter 360° to thoroughly remove all dust caught in the filter.
Lightly tap the filter several times to remove any excess dirt.
4. Allow the HEPA filter to thoroughly dry for at least 24 hours. 2. Reinstall the dust compartment.
Insert until it
clicks into place
1. Insert the HEPA filter into the vacuum cleaner and gently press
down, as illustrated.
Installing the HEPA Filter
Notes:
Only use clean water to clean the filter. Do not use detergent.
Do not attempt to clean the HEPA filter with a brush or finger.
1
2
Dust Compartment Release Switch