Xiaomi Mi Vacuum Cleaner G10 - Manual (Page 8)

12 13
How to Use How to Use Care & Maintenance
Using the Mopping Function
1. Dampen the mop pad and wring out excess water, then attach it
securely to the bottom of the water tank.
2. Open the water tank plug, add an appropriate amount of clean
water, then close the plug.
Notes:
Do not step on the water tank, as this could permanently damage it.
Heavily soiled floors should be vacuumed prior to mopping for a
better result.
Do not use the mopping function on carpet.
Do not use any cleaning agents or disinfectants.
3. Attach the smart high torque brush bar to the water tank
by lining up the magnets on each component until they snap
together.
4. This function is designed for vacuuming and wiping down
hardwood and tile floors.
Notes:
The ball valve in the water tank controls how much water is
dispensed. The ball is a moving part and may make a rolling
sound when starting and stopping. This is normal.
When not in use, please keep the switch to the OFF position.
Always use genuine parts to keep your warranty from being
voided.
If the filter, extension rod, or smart torque brush bar becomes
clogged, the vacuum cleaner will stop working shortly. To restore
its functionality, clean the clogged component.
If the vacuum cleaner will not be used for an extended period,
fully charge it and disconnect it from the power then store it in
a cool, low-humidity environment away from direct sunlight. To
avoid over-discharging the battery, recharge the vacuum cleaner
at least once every three months.
Maintenance Precautions
Wipe the vacuum cleaner with a soft, dry cloth.
Cleaning the Vacuum Cleaner
Crevice Nozzle: For vacuuming narrow crevices and areas around
doors, windows, baseboards, corners, stairs, etc.
Note: The smart high torque brush bar can be attached
directly to the vacuum cleaner.
Smart High Torque Brush Bar: For cleaning different types of
flooring such as wood, marble, tile, and short carpet. When Auto
Mode is activated, the vacuum cleaner can automatically adjust
its suction level depending on the surface type.
Using Different Accessories