Sony Underwater Housing for Select RX100-Series Cameras - Manual (Page 27)

27
available for [Device type] vary depending on the selected
type.
Device type : Selects the model to add to the [Device List]
window.
IP Address : Enter the IP address of the receiver/battery
charger/RMU-01 to be added.
To cancel the addition of a receiver/battery charger/
RMU-01 unit
Click [Cancel].
Context window
Right-click on a node in the [Device List] window to
display the context window.
Property : Displays the [Property] window for the selected
device.
For details on the [Property] window, see “[Property]
Window” on page 45.
Device information : Displays information about the
selected device.
For more information on the contents, see “Confirming
the device types and IP addresses of devices registered in
the [Device List] window” on page 26.
Add to Status Viewer : Adds the selected receiver channel
to the status viewer in the main window.
When you right-click a receiver, the receiver channel for
that receiver is added to the status viewer.
Connect : Reconnects to receivers, battery chargers, and
RMU-01 units for which communication with Wireless
Studio has been interrupted.
Save Single Settings : Saves the settings of the selected
device to a file.
For details, see “To save the individual settings of a device
to a file” on page 22.
Load Single Settings : Loads settings that are saved to a
file to the selected device.
For details, see “To open a previously saved individual
settings file and apply its settings” on page 22.
Type Device type
Receiver DWR-R01D
DWR-R02D
DWR-R02DN
DWR-R03D
RMU RMU-01
BC-DWX BC-DWX1