Erica Synths Cymbals Eurorack Module (10 HP) - Manual (Page 2)

CY
B
A
LS
THANK YOU FOR PURCHASING
ERICA SYNTHS DRU ODULE!
Erica Drum Series modules include high-end,
unique functionality and superior quality modules,
which allow you to design extensive, feature rich
modular system for sound design and live
performances. Enjoy!
SAFETY INSTRUCTIONS
Please follow the instructions for use of the Erica Synths module
below, ‘cause only this will guarantee proper operation of the module
and ensure warranty from Erica Synths.
Water is lethal for most of the electric devices, unless they are made waterproof.
This Erica Synths module is NOT intended for use in a humid or wet environment.
No liquids or other conducting substances must get into the module. Should this
happen, the module should be disconnected from mains power immediately,
dried, examined and cleaned by a qualified technician.
Transport the instrument carefully, never let it drop or fall over.
Warranty does not apply to modules with visual damages.
Do not expose the module to temperatures above +50° C or below -20° C.
If you have transported module in extreme low temperatures, leave it
in room temperature for an hour before plugging it in.
The module has to be shipped in the original packaging only. Any module
shipped to us for return, exchange and/or warranty repair has to be in its
original packaging. All other deliveries will be rejected and returned to you.
Make sure you keep the original packaging and technical documentation.
This device complies to the EU guidelines and is manufactured RoHS conforming
without use of lead, mercury, cadmium and chrome. Nevertheless, this device is
special waste and disposal in household waste is not recommended.
You will find Erica Synths terms of warranty at
www.ericasynths.lv
Items for return, exchange and/or warranty repair have to be sent to:
Erica Synths
Andrejostas Str. 43
Riga
Latvia
LV-1045
User manual by Girts Ozolins@Erica Synths.
Design by Ineta Briede@Carre Branding.
Copying, distribution or any commercial use in any way
is prohibited and needs the written permission by Erica Synths.
Specifications are subject to change without notice.
In case of any questions, feel free to contact us through
www.ericasynths.lv or via e-mail [email protected]
Erica Synths Cymbals is a distinct topology digital/analogue
module, where cymbal samples are passed thru AS3330
based VCA and controlled via envelope generators of
unique design. The module features 10 sets of custom
Crash and Ride cymbal samples with Tune control and
individual Decay control. Accent and CV control over Tone
and Decay allow you to create lot of variations in the
Cymbals track. Extra feature is sample looping – when it’s
on, a certain part of the sample is looped while the
envelope decay is on, thus creating distinct, delay-like
effect. Cymbal samples are developed by produced and
musician Nero Bellum.
FEATURES
10 sets of custom cymbal samples
Cymbal samples thru analogue VCA and EG
Tune and Decay controls
CV control with an attenuators over Tune and Decay
Sample loop switch for Crash and Ride
Manual triggers
Accent for better expression
SPECS
Audio output level -5…+5V
CV level (full span) -5V - +5V
Accent CV level 10V
Tigger level 5V
Trigger time 1ms
Power consumption 95mA @ +12V, 36mA @ -12V
Module width 10HP
Module depth 45mm