Erica Synths Bass Drum2 Eurorack Module (14 HP) - Manual (Page 2)

MODE
NOISE OUT
TRIG
GATE
Set master pitch of the Bass drum
Set decay time of the pitch envelope
Adjust the depth of pitch envelope
Set the volume envelope attack time. Like on the classical
drum machines full. CW setting gives the sharpest attack
Set the volume envelope decay time from very short to
overlapping base roars
Adjust the overdrive level of the drum sound form none to extreme
These are CV attenuators of relevant CV inputs
Use the manual trigger button to check the bass drum
settings and add some beats during live performance
These are CV inputs to control Pitch, Decay and Drive
Switch between amplitude envelope modes. TRIG mode is classic
Bass Drum, triggered by a short pulse; when set to GATE mode,
ASR envelope is activated the module considers gate length. Use
this mode for designing unconventional kick sounds
This is the Trigger input. The LED indicates incoming triggers
This is the Accent input. +5V CV will increase the volume of
the drum and add an expression to the bassdrum track
This is the output of the module
This is a bonus output – noise
PITCH
TUNE
TUNE DEPTH
ATTACK
DECAY
DRIVE
DECAY CV
MAN TRIGG
DECAY CV
MODE
TRIGG
ACC
OUT
NOISE OUT