Safety messages -1, Rosemount 5300 series, Safety instrumented systems (4-20 ma only) – Emerson Process Management ROSEMOUNT 5300 User Manual

Page 177

Advertising
background image

Reference Manual

00809-0100-4530, Rev BA
July 2009

Rosemount 5300 Series

www.rosemount.com

Section 8

Safety Instrumented Systems (4-20 mA only)

Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-3
Functional Specifications . . . . . . . . . . . . . . . . . . . . . . . . . page 8-4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-4
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-4
Operation and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . page 8-5
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-7
Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-7
Terms and Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-7

SAFETY MESSAGES

Procedures and instructions in this section may require special precautions to
ensure safety of personnel performing the operations. Information that raises
potential safety issues is indicated by a warning symbol (

). Refer to the

following safety messages before performing an operation preceded by this
symbol.

Failure to follow these installation guidelines could result in death or serious
injury.

•

Make sure only qualified personnel perform the installation.

•

Use the equipment only as specified in this manual. Failure to do so may
impair the protection provided by the equipment.

Explosions could result in death or serious injury.

•

Verify that the operating environment of the transmitter is consistent with the
appropriate hazardous locations certifications.

•

Before connecting a HART

®

-based communicator in an explosive atmosphere,

make sure the instruments in the loop are installed in accordance with
intrinsically safe or non-incendive field wiring practices.

Electrical shock could cause death or serious injury.

•

Use extreme caution when making contact with the leads and terminals.

Advertising