Emerson Process Management ROSEMOUNT 5300 - Manual (Page 218)

Reference Manual
00809-0100-4530, Rev BA
July 2009
Rosemount 5300 Series
A-34
EN (DIN) Flanges (14) (continued)
ID DN80, PN100. HTHP / HP units
IE DN80, PN160. HTHP / HP units
IF DN80, PN250. HTHP / HP units
JA DN100, PN16
JB DN100, PN40
JC DN100, PN64. HTHP / HP units
JD DN100, PN100. HTHP / HP units
JE DN100, PN160. HTHP / HP units
JF DN100, PN250. HTHP / HP units
KA DN150, PN16
JIS Flanges (13)
UA 50A, 10K
UB 50A, 20K
VA 80A, 10K
VB 80A, 20K
XA 100A, 10K
XB 100A, 20K
YA 150A, 10K
YB 150A, 20K
ZA 200A, 10K
ZB 200A, 20K
Threaded Connections (15) Probe Type
RA 1 ½ in. NPT thread All
RB 1 in. NPT thread 3A, 3B, 4A, 4B, 5A, 5B, standard temperature
and pressure
RC 2 in. NPT thread All for standard temperature and pressure
SA 1 ½ in. BSP (G 1 ½ in.) thread All
SB 1 in. BSP (G 1 in.) thread 3A, 3B, 4A, 4B, 5A, 5B, standard temperature
and pressure
Tri-Clamp Fittings (15) Probe Type
FT 1 ½ in. Tri-Clamp 4A, 5A, 5B standard temperature and pressure
AT 2 in. Tri-Clamp 4A, 4B, 5A, 5B standard temperature and
pressure
BT 3 in. Tri-Clamp 4A, 4B, 5A, 5B standard temperature and
pressure
CT 4 in. Tri-Clamp 4A, 4B, 5A, 5B standard temperature and
pressure
Proprietary Flanges
TF Fisher - proprietary 316L SST (for 249B cages) Torque Tube Flange
TT Fisher - proprietary 316L SST (for 249C cages) Torque Tube Flange
TM Masoneilan - proprietary 316L SST Torque Tube Flange
Special Process Connection
XX Special Process Connection
Code Hazardous Locations Certifications
NA Not Applicable
Code Options
P1 Hydrostatic testing (16)
N2 NACE material recommendation per MR 0175 (17)
LS Long stud (18) 9.8 in (250 mm) for flexible single lead probe to prevent contact with wall/nozzle.
Standard height is 3.9 in (100 mm) for probes 5A and 5B; 5.9 in. (150 mm) for probes 6A and 6B.