Rosemount 5300 series, Reference manual, Mounting a centering disc for pipe installations – Emerson Process Management ROSEMOUNT 5300 User Manual
Page 55
Reference Manual
00809-0100-4530, Rev BA
July 2009
3-25
Rosemount 5300 Series
Mounting a Centering
Disc for Pipe
Installations
To prevent the probe from contacting the bridle wall when replacing displacers
or installing in pipes, centering discs are available for rigid single, flexible
single, and flexible twin lead probes. The disc is attached to the end of the
probe and thus keeps the probe centered in the bridle. The discs are made of
stainless steel, Alloy C-276, or PTFE.
When mounting a centering disc, it is important that it fits correctly in the pipe.
See Table 3-7 for the appropriate disc diameters.
Table 3-7. Choose the right
centering disc diameter for a
particular Pipe Schedule.
This table shows the actual outer diameter for discs.
Table 3-8. Outer diameter for
discs according to disc size.
Mounting a Centering Disc on Flexible Single Probes
Pipe Schedule
Pipe Size
5s,5
10s,10
40s,40
80s,80
120
160
2 in.
2 in.
2 in.
2 in.
2 in.
NA
(1)
(1) Schedule is not available for pipe size.
NA
(2)
(2) No centering disc is available.
3 in.
3 in.
3 in.
3 in.
3 in.
2 in.
4 in.
4 in.
4 in.
4 in.
4 in.
4 in.
3 in.
5 in.
4 in.
4 in.
4 in.
4 in.
4 in.
4 in.
6 in.
6 in.
6 in.
6 in.
6 in.
4 in.
4 in.
7 in.
NA
6 in.
6 in.
NA
8 in.
8 in.
8 in.
8 in.
8 in.
6 in.
6 in.
Disc Size
Actual Disc Diameter
2 in.
1.8 in. (45 mm)
3 in.
2.7 in. (68 mm)
4 in.
3.6 in. (92 mm)
6 in.
5.55 in. (141 mm)
8 in.
7.4 in. (188 mm)
Centering disc
Weight
Bolt
Tab washer
1. Mount the centering disc at the
end of the weight.
2. Make sure that the tab washer
is properly inserted in the
centering disc.
3. Fasten the centering disc with
the bolt.
4. Secure the bolt by folding the
tab washer.
NOTE!
When using centering discs made of
PTFE, note that the maximum
temperature is 392 °F (200 °C).
Tab washer