GIGABYTE 31.5" M32U 4K HDR 144 Hz Arm Edition Gaming Monitor - Manual (Page 27)

- 26 -
USING THE DEVICE
Turning the Power On/Off
Make sure the power switch next to the AC power input jack is switched to ON .
Power On
1. Connect one end of the power cable to the AC IN jack at the rear of the monitor.
2. Connect other end of the the power cable to a power outlet.
3. Press the Control button to turn on the monitor. The Power LED will light in
white, indicating the monitor is ready to use.
Power Off
Press the Control button for 2 seconds to turn off the monitor.
Note: When the Main menu appears on the screen, you can also turn off the monitor by
moving the Control button down ( ). Refer to page 31