GIGABYTE 31.5" M32U 4K HDR 144 Hz Arm Edition Gaming Monitor - Manual (Page 33)

- 32 -
KVM
Press to switch device.
To switch to USB Type-C input source, simply press the KVM button or the Control
button.
However, when there is no input signal from currently selected input source, the
system will return to the previous connected input source.
Note: This option will be disabled if the KVM button function is disabled ( KVM
OFF ).
• KVM Wizard: Configure the KVM related settings.
Set the input source to be bound with USB Type-B connection first, and
then following with USB Type-C connection.
Select USB-B Display
HDMI 1
HDMI2
DisplayPort
Type-C
Select Enter
Select TYPE-C Display
HDMI 1
HDMI2
DisplayPort
Type-C
Select Enter
USB-B Display Selection TYPE-C Display Selection
Note: If you set the USB-B Display setting to Type-C, the TYPE-C Display menu
option will automatically be disabled. You will then see the KVM status in the KVM
Wizard page as below.
KVM Status
USB-B : Type-C
Type-C : N/A
• KVM ON/OFF: Enable/Disable the KVM button function.
√ Select ON to enable the KVM button function. Once the system
detected USB Type-C input signal, a message box will appear on the
screen.