Detaching the monitor stand, Wall mounting (optional), Detaching the monitor stand -10 – Lenovo ThinkVision P27u-20 27" 4K IPS Monitor User Manual
Page 30: Wall mounting (optional) -10
2-10 P27u-20 Flat Panel Monitor User’s Guide
Detaching the monitor stand
After placing the monitor face down on a clean and soft surface, push the hook of the stand and lift
the stand up to remove it from the monitor.
Wall Mounting (Optional)
Refer to the instructions that come with the VESA compatible base mounting kit.
1.
Place the monitor face down on a non-abrasive surface on stable flat table.
2.
Remove the stand.
3.
Attach the mounting bracket from the wall mounting kit to the monitor.
4.
Mount the monitor on the wall by following the instructions that come with the base
mounting kit.
Note:
For use only with UL and GS Listed Wall Mount Bracket with minimum weight/load
bearing capacity of 8.00 kg. In order to fulfil TCO Certification for this wall mounting option,
shielded power cable is mandatory to be used. Attach the mounting bracket from the VESA
compatible wall mounting kit (100mm x100mm distance), the type of VESA mounting screw
is M4 x 10 mm.