Information, Osd warning, Ioformatioo – NEC EA242WU 24" Monitor User Manual
Page 46: Osd arning
English−44
IOFORMATIOO
IOFORMATIOO Menu
INFORMATION
Provides information about the current input signal, the model, serial numbers and USB-C port’s status of
your monitor.
OSD arning
OSD warning messages close by touching the MENU key.
OO SINOALN: This function gives a warning when there is no horizontal or vertical sync. After power is turned on or when there is
a change of input signal, the
“OO SINOAL” window will appear.
OUT OF RAONEN: This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned
on, or there is a change of input signal, or if the video signal doesn’t have proper timing, the
“OUT OF RAONE” message will
appear.
USB functionalityN: This message gives a request to set [USB FUNCTIONALITY] setting. See
Remove USB-C cableN: This function gives a warning when abnormal voltage is detected on USB-C port. Please refer to “USB
Type-C device does not work” in troubleshooting. See