FujiFilm EF-X500 Flash User Manual
Page 70
63
W
ir
eless F
lash Phot
og
raph
y
4
O
When placing remote units, note that external light sources
may interfere with their operation.
N
You can test-fi re the fl ash to preview the eff ects of the current
fl ash setup (modeling fl ash). For information on choosing the
role of the test button, see page 82 or the camera manual.
Units will enter standby mode if no operations are performed
for a set period (
P
84). Normal operation can be restored
by pressing the test button; to reactivate all units, press the
test-button on the master fl ash. If no operations are performed
for an additional period after the units have entered standby
mode, the units will turn off automatically, and can only be re-
activated by rotating the power switch to
OFF
and then back
again. The delay before the remote units enter standby mode
or turn off automatically can be selected in the setup menu
(
P