FujiFilm EF-X500 Flash - Manual (Page 85)

78
Sla
ve M
ode
5
P and N (Slave) Modes
4 Rotate the command dial to
choose a slave mode and press
OK .
• P-MODE (no pre-fl ash): The unit ignores monitoring
“pre-fl ash” pulses and fi res only in response to the
main fl ash. Choose this option if the master unit uses
pre-fl ash pulses.
• N-MODE (normal): The unit fi res in response to the fi rst
fl ash from the master unit. Choose this option if the
master unit does not use pre-fl ash pulses.