Barco PDS-4K HDMI Presentation Switcher User Manual

Page 201

Advertising
background image

201

R5912621 /01 PDS–4K

“x” can be 0, 1, 2, 3
◦

0: Soft reset.

◦

1: Factory reset.

◦

2: Factory reset (save IP).

◦

3: Factory reset (save IP/EDID).

•

Response:
-

response: null

-

success: (0=success, anything else is an error)

•

Example:
-

{"params":{"reset": 0}, "method":"resetFrameSettings", "id":"1234",
"jsonrpc":"2.0"}

powerStatus

•

Definition:
-

This queries the power plug status of the Event Master processor.

•

Request:
-

params:

{}

- It doesn’t require any parameter.

•

Response:
-

response:

{FrameId1 :{ PowerSupply1Status":X}}

◦

PwrStatus1 gives the power status of the 1st slot in Event Master processor with frame id FrameId1f

◦

1. Power supply module is not present.

◦

2. Power supply module is present, but there is no power cable.

◦

3. Power supply module is present, and the cable is plugged in, but there is no DC current.

◦

4. Power supply module is present, and everything is OK.

-

success: (0=success, anything else is an error)

•

Example:
-

{"params":{}, "method":"powerStatus", "id":"1234", "jsonrpc":"2.0"}

listPresets

•

Definition:
-

This queries the list of Presets on a particular destination or on the system.

•

Request:
-

params:

{"ScreenDest":x , "AuxDest":x}

,

“x” can be:
◦

–2: Do not include any destinations of this type. (Has priority over particular id, if passed as a
parameter.)

◦

–1: Do not care (All presets). (Has priority over particular id, if passed as a parameter.)

◦

0–999: want to see the presets with the destination this particular id in it or array of ids. Eg.
"ScreenDestination":[{"id": 2}, {"id": 3}]

•

Response:
-

response: Array of:

[{"id": 0, "Name": "Preset3.00", "LockMode": 0, "presetSno":

3.00}, {"id": 1, "Name": "Preset4.00", "LockMode": 0, "presetSno": 4.00}]

◦

Response contains the array of presets. Above response contains id, name, lock mode preset serial
number of the all the presets.

-

success: (0=success, anything else is an error)

•

Example:
-

{"params":{"ScreenDest": 0}, "method":"listPresets", "id":"1234",
"jsonrpc":"2.0"}

listDestinationsForPreset

•

Definition:
-

Lists the content of a Preset.

Remote Control Protocol

Advertising