Barco PDS-4K HDMI Presentation Switcher User Manual
Page 202
R5912621 /01 PDS–4K
202
•
Request:
-
params:
{"id":x }
,
“x” can be:
◦
–1: List all Presets.
◦
0–999: list only that specific Preset.
•
Response:
-
response: Array of:
[{"id": 0, "Name": "Preset3.00", "LockMode": 0, "presetSno":
3.00, "ScreenDest":[{"id": 0}, {"id": 3}]}]
◦
Response contains the array of Presets.
-
success: (0=success, anything else is an error)
•
Example:
-
{ "params":{"id": 0}, "method":"listDestinationsForPreset", "id":"1234",
"jsonrpc":"2.0"}
savePreset
•
Definition:
-
Creates a Preset on the Event Master processor.
•
Request:
-
params:
{"presetName": "NewPreset", "ScreenDestination":[{"id": 2}, {"id": 3}]}
◦
“presetName”—Name of the Preset to save.
◦
ScreenDestinations—ScreenDest id for the Preset to be created.
◦
ScreenDestination is an optional parameters. If user didn’t provide it, Preset will be saved for
selected destinations.
•
Response:
-
response: null
-
success: (0=success, anything else is an error)
•
Example:
-
{"params": {"presetName": "NewPreset"}, "method":"savePreset", "id":"1234",
"jsonrpc":"2.0"}
-
{"params": {"presetName": "NewPreset", "ScreenDestination":
{"id": 0}, "method":"savePreset", "id":"1234", "jsonrpc":"2.0"}
Key points regarding Preset, which are same for rename, activate, and delete:
-
“id”—id of the preset.
-
“presetSno”—preset serial number. User can provide floating point number if required. Eg. "presetSno":
1.01, "presetSno": 1.00, "presetSno": 1, "presetSno": 1.1, "presetSno": 1.10.
Kindly note that 1.1 and 1.10 or 1.00 and 1 are same.
-
“presetName”—Name of the preset.
renamePreset
•
Definition:
-
Rename a Preset on the Event Master processor. User can rename Preset with id, Preset serial
number, or Preset name.
-
Send any one of the parameters to rename Preset.
•
Request params:
-
params:
{"id": x, "newPresetName": "NewPresetName"}
-
params:
{"presetSno": x.y, "newPresetName": "NewPresetName"}
-
params:
{"presetName": "OldPresetName", "newPresetName": "NewPresetName"}
◦
“newPresetName”—New Preset name to set.
•
Response:
-
response: null
-
success: (0=success, anything else is an error)
•
Example:
-
{"params": {"id": 0, "newPresetName": " newPresetName "},
"method":"renamePreset", "id":"1234", "jsonrpc":"2.0"}