Teac UD-701N USB DAC, Network Audio Player & Stereo Preamplifier (Black) - Manual (Page 22)

22
Settings
1
Press the MENU button to open the menu
screen.
2
Turn the SOURCE knob to show the item that
you want to set.
o You can also use the up and down ( k , j ) buttons on the
remote control.
The menu items appear in the following order.
UPCONVERT
CLOCK SYNC
XLR OUT POLARITY
LINE OUT LEVEL
HEADPHONE XLR
DIMMER
VOLUME TYPE
DISPLAY TYPE
VERSION INFO
LINE PASS THROUGH
L/R BALANCE
NETWORK
NET DISPLAY STYLE
DSD LOW PASS FILTER
PCM DELTA SIGMA
DELTA SIGMA Fs
AUTO POWER SAVING
3
Press the SOURCE knob.
o You can also press the ENTER button on the remote control.
o The currently set value is shown on the display.
4 Turn the SOURCE knob to change the setting
value.
o You can also use the up and down ( k , j ) buttons on the
remote control.
o Press the MENU button to return to setting item selection.
5
Press the SOURCE knob.
o You can also press the ENTER button on the remote control.
6 When you are done changing settings, press the
MENU button to show the input source status
again.
o If you do not do anything for about seven seconds, the dis-
play will return to showing the input source status.