Display style during network input, Network operation mode, Left-right balance adjustment – Teac UD-701N USB DAC, Network Audio Player & Stereo Preamplifier (Black) User Manual
Page 25: Line pass through, Information display, Net display style normal, Network normal, L/r balance ctr. 0.0db, Line pass through off, Version info system
EN
25
Display style during network input
MENU
NET DISPLAY STYLE
NORMAL
Select what is shown when the network is the playback source.
NORMAL
The playback source is shown with the input signal format or
volume.
PLAYER
The index, time and other items are shown.
Network operation mode
MENU
NETWORK
NORMAL
NORMAL
This is the normal mode. All network functions can be used.
RAAT dedicated
This mode is dedicated to RAAT (Roon).
The network can only connect with Roon.
o
Audio quality improvement is sought by stopping network func-
tions (including OpenHome (UPnP), Spotify Connect and Tidal
Connect) other than Roon.
o
This unit will stop being shown as a player/renderer in TEAC HR
Streamer and other OpenHome (UPnP) control apps.
DEACTIVATE
This stops network functions.
o
NETWORK will not be shown as an input source option (page 16).
Left-right balance adjustment
MENU
L/R BALANCE
ctr. 0.0dB
Adjust the left-right balance.
This setting can be made for each output.
This can be set from Lch 24.0 dB to Rch 24.0 dB in 0.5dB increments.
When the volume is the same for both left and right channels, “ctr.
0.0dB” will be shown.
Line pass through
MENU
LINE PASS THROUGH
OFF
This outputs line input from RCA and XLR connectors without
changing the volume.
OFF
No through inputs are set.
LINE RCA
LINE XLR
Signals are output without volume being adjusted by the unit.
ATTENTION
If inputs connected to an ordinary fixed-output device are selected,
signals that are too strong could be output to the speakers, resulting
in damage to them.
For example, the speakers connected to a power amplifier con-
nected to this unit can be shared as the front speakers of the AV
amplifier if the pre-out connectors (for example, FRONT L/R) of the
AV amplifier are connected to this unit’s RCA analog audio input
connectors and LINE PASS THROUGH is set to LINE RCA. (The AV
amplifier controls volume adjustment when the input source is set
to “LINE RCA”.)
Information display
MENU
VERSION INFO
SYSTEM
This shows the version of the firmware used by the unit.
SYSTEM
The microcomputer firmware version
USB
The USB firmware version
FPGA
The FPGA firmware version
Bluetooth
The Bluetooth module firmware version
NETWORK
The network module firmware version